FR
Electronic Components
Production Tools & Equipment
Industrial Components
Request Samples

Blog

Keeping Your Products Identifiable

Read More


Use the LED Drivers Designed for Higher Yields

MEAN WELL's multifunctional HLG indoor/outdoor LED driver is a favourite amongst the horticulture industry mainly due to its adjustable dimming capabilities that facilitate efficient top- and inter-lighting, thus expediting exceptional growth output.

Read More


Automated Dimming, a Really Bright Idea

Agriculture, horticulture, manufacturing.           
Many sectors use this to improve production
and reduce consumption       
   

Read More


What are AEC-Q200 Qualified Components?

The AEC (Automotive Electronics Council) is the industry organization promoting the qualification standards for automotive manufacturers and automotive electronic component manufacturers. The AEC developed the AEC-Q series, serving as the industry standard adopted for automotive electronic components, with the Q200 series focusing on passive components specifically.

Read More


Yageo AT Series Automotive Grade Thin Film Chip Resistors

Did you know that Yageo has a line of AT Series Automotive Grade Thin Film Chip Resistors are AEC-Q200 qualified resistors designed for automotive electronics, industrial and medical equipment, telecommunications, and test and measuring equipment. The resistors feature superior resistance against sulfur containing atmosphere, an MSL I moisture sensitivity level, and offer high component and equipment reliability. As with many other automotive grade thin film chip resistors, the Yageo AT Series is a good option for many different applications.

Read More


Wago Ultra-Compact Terminal Block Approved for Larger Conductors

Wago Corporation announced the release of their new universal surface mount PCB solution – the 2059 which has been approved for 20 AWG/0.5 mm2 conductors.

Read More


What to know when buying enclosures

 

Read More


Yageo Addresses Alternative Energy in all its Passive Lines

The fast growing global hunger for electricity cannot be met in the future by traditional sources of energy such as coal, oil, and gas, while atomic energy is regarded with reluctance due to its inherent risks and the unsolved problem of nuclear waste.

Read More


How to Select the Right Microscope or Video Inspection System

Choosing the right inspection system for your application can be a daunting task. For industrial applications 3 types of inspection systems are generally used: Stereo Zoom Microscopes, Trinocular Stereo Zoom Microscope Inspection Sytems, and Video Lens Inspection Sytems. This guide describes these systems, their common applications along with pros & cons.

Read More


Stannol Solder Bars for Electronic Manufacturing

Quality has a long tradition and for the Stannol company it`s more than 130 years. Stannol is well-known to worldwide customers for innovative soldering wires, flux and soldering pastes that are manufactured with care and have impressive reliability. Did you know that Stannol solders for printed circuit boards are produced from virgin metals only and their tin has a minimum purity of 99.9%.

Read More


Why source your components from Asia?

There are several reasons companies will source products from Asia. Some are cost-related and others are technology-focused. Sourcing in Asia can substantially reduce your costs. Determining if it’s right for you depends on many factors including materials, labour costs, technology, and lead-times. Whether you are looking for passives, optoelectronics, electromechanical, connectors, timing devices, hardware, discretes/semiconductors or circuit protection, we'll help you determine if Asian sourcing is a sensible, low-cost alternative for your project.

Read More


7 Common Mistakes to avoid when selecting a static control floor

A substantial amount of confusion results from a general lack of knowledge about static control specifications and standards combined with confusing and/or contradictory data found on the Internet. Because of the massive amount of both reliable as well as unreliable information available on the web, facility designers often make the same common mistakes when selecting static control flooring materials.

Read More


Why Proper Surface Preparation is Important to Ensure a Strong Adhesive Bond

Adhesives can be seriously strong. They’re used in the manufacture of anything from airplanes, automobiles and massive machinery to baby products, golf clubs and mobile phones. These are demanding applications. But if you’re hoping to achieve optimal performance, there’s a job that must be completed before an adhesive is applied: surface preparation.

Read More


The evolution of diodes

Diodes are also used for various purposes such as the production of different types of analog signals, microwave frequencies and even light of various colors. When current passes through Light Emitting Diodes or LEDs, it emits light of a specific wavelength. Such diodes are used for displays, room lighting and for decoration.

Read More


Are Your Threaded Fasteners Failing?

Equipment failure has many causes. Overuse, inadequate maintenance, age— all of these factors and more are common sources of breakdown. Another common cause— and one of the easiest to prevent— is fastener loosening due to worn, fatigued and/or poorly threaded fasteners. LOCTITE® has a simple solution to help tie up the loose ends on your equipment.

Read More


Consider Smocks for your ESD Program

Are smocks part of your ESD Control Program? While a person may be grounded using a wrist strap or other grounding methods, that does not mean that insulative clothing fabrics can dissipate a charge to that person’s skin and then to ground. Personnel clothing usually is electrically separate or isolated from the body. Garments that are used to estab
lish the primary ground path for a person shall provide a resistance of less than 35 megohms from the person to the groundable point of the garment.

Read More


Make 1 Change to your Supply Chain Process and Save 5 Ways

More and more companies are seeing the benefits and taking advantage of point-of-use intelligent vending machines. According to a recent report by Global Industry Analysts, intelligent vending machines are projected to reach 2.7 million units by 2020. The rapid increase has been driven by benefits such as ease of use, higher operating efficiency, and considerable cost savings.

Read More


Is your equipment EMI/RFI protected?

The world today is increasingly electronic, with millions of waves and signals floating through the air at any given moment. The electromagnetic waves generated by electronic devices can easily negatively affect other, similar, electronic devices. Such affects are called Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI). EMI and RFI may cause malfunctions, specifically, the suppression of signals generated internally in a device, external ambient interference with equipment operation, or emissions generated internally that will interfere with equipment operation. Therefore, EMI and RFI are potential problems in any industry.

Read More


SunLed's new true chip type surface mount LED

Designed as a next generation alternative to traditional subminiature type LEDs, SunLED's XZxx55W-A2RT reverse-mount LED series eliminates the typical Yoke Lead or Z-Bend leads to provide engineers with a true chip type Surface Mount LED.

Read More


A Little Printer Label Can Go a Long Way

While labels might be small, they can have a huge impact on your workplace. An effective and consistent labeling and signage system that you can be proud of offers your facility 5 key benefits:

Read More


Are your high-speed interfaces ESD protected?

The latest high speed interfaces with data rates in the gigabyte range allow only minimum additional capacitance on the line. And, as these interfaces continue to get smaller, they are even more susceptible to ESD strikes. Low capacitance ESD protection diodes were developed specifically to maintain signal quality for high-speed data lines such as USB, HDMI and RF antennas.

Read More


A Static Dissipative or Static Conductive Solution?

In ESD-safe environments, controlling static is paramount. Without eliminating the risks associated with static electricity in areas susceptible to damage by static, you’re going to run into potentially costly problems. With that in mind, it’s time to make an important decision: Should I choose static dissipative or static conductive solutions?

Read More


Winstar Launches New 2.4

Amplify your device’s value and appeal with a rich color TFT LCD display. These TFT LCD screens allow you to showcase vivid colors, detailed images, and bright graphics with their full color RGB mode.

Read More


Winstar Launches New Circular OLED

OLED's or Organic Light Emitting Diodes, are an offshoot of existing conventional LED technology. LEDs are semiconducting light sources that function through electroluminescence.

Read More


Aimtec Launches 5W Open-Frame Miniature AC-DC Power Supply

Aimtec just released a new series of AC-DC power converters, AMEOF5-JZ, designed to expedite and simplify industrial and commercial product design in a highly affordable solution while offering the smallest possible footprint.

Read More


New Longer Life AC-DC Converters Ideal for Lighting Industry

Aimtec just released longer life AC-DC regulated converters, which are available in 1, 2 and 3 watt configurations and packaged in a miniature size of only 1.46 x 0.96 x 0.71 inches (37.00 x 24.50 x 18.00mm). The 3 new series, AME1-NJZ, AME2-NJZ and AME3-NJZ, were designed without the use of electrolytic capacitors.

Read More


Aimtec releases its newest 6W DC-DC Converter: UL listed, 1x1 package

The AM6CW-FZ series is the newest addition to Aimtec’s 6 Watt DC to DC converter product line. This new converter is UL listed, operates with an ultra wide input of 4:1 (9-36, 18-75VDC) input ranges and is housed in a miniature 1x1 inch package. This versatile product is feature rich with input to output isolation of 1500 VDC, plus continuous short circuit protection, over voltage protection, over load protection, remote on / off control feature, plus with an operating temperature range of -40°C to +85°C (with derating starting at 60°C for 3.3 and 5V models and 70°C for all other models).

Read More


New TFT LCD Module Enables Application-based Customization

Winstar has just launched its Y Series family of TFT LCD display modules. The new Y Series now provides built in DC-DC multi-output power, whereas traditional TFT LCD modules do not, making it much easier for customers to design their own applications. The Y Series provides the same 40-pin uniformed FPC as traditional TFT LCD modules, and is available in 4 sizes: 3.5”, 4.3”, 5.7” and 7” display modules.

Read More


Aimtec 2 Watt DC-DC converter features continuous short-circuit protection and wider ambient temperature range

Aimtec has unveiled their latest in their series of DC-DC unregulated converters the AM2DS-NZ, 2-W series. The AM2DS-NZ features continuous short-circuit protection with automatic recovery restart. The restart feature will work continuously until the short-circuit condition is cleared protecting the converter, the load and the converter’s input circuit and source from extremely high currents caused by output short circuits.

Read More


We are growing again!

Diverse Electronics can provide you with a real opportunity to excel. As one of the North America's fastest growing electronic component distributors, we have a wide range of challenging job openings for the entrepreneurial-minded.

Read More


APEM expands its range of proportional thumbwheels

APEM expands its range of proportional thumbwheels with a new, friction hold version. This new patented technology allows for ultra-precise movement while allowing the user to hold the selection in a set position. The HR series uses proven non-contacting Hall Effect sensor technology, independent from the friction mechanism, providing a smooth and precise linear voltage output that does not degrade over time. The HR series with friction hold is ideal in applications that include panel mount and joystick integration as well as agricultural machinery, material handling equipment and off-road vehicles.

Read More


Why choose SN100C for your soldering process?

For lead-free soldering to be considered successful it is not sufficient just to have dealt with the challenges of mass production. It is also necessary to establish that the soldered joints produced are at least as reliable as those made with SN-37Pb alloy. Reliability means the length of time in service that the initial functionality of the joint can be maintained.

Read More


Try Stannol Trilence Solder Wire for your manufacturing

Stannol has released a new solder wire the Trilence which is the first in their newly designed series. It’s a halogen-activated rosin flux which is based on a matrix of synthetic resin. This solder wires can be applied like conventional wires to solder. The maintenance intervals and the downtime of soldering machines can be considerably reduced by the very low spatter. Diverse Electronics carries the full line, give us a call to learn more or watch the video below.

Read More


New from O.C. White the Green-Lite Ultima Clean Room Magnifier

Here at Diverse Electronics, we love to equip our partners businesses with the tools they need to grow and succeed. Of course, that would never be possible without the invaluable help of suppliers like O.C. White.

Read More


Why You Should Integrate Adhesives into Your LED Manufacturing Process

Across the industry, manufacturers of LED lamps are discovering the benefits of high-performing adhesives over the use of mechanical fasteners like screws and clips. Whether comparing the two assembly methods by manufacturing cost, productivity or performance, adhesives often emerge as the most advantageous option. So, why should you consider integrating adhesives into your LED design?  

Read More



Help