TechSpray Zero Charge High Gloss Static Dissipative Floor Coating 1 gal
MPN: 1720-G Fabricant: TechSpray
This product is a high gloss floor finish designed for use in electronic production areas, computer rooms and other static sensitive areas. Contains a non-migratory, static dissipative polymer, which will maintain a constant surface resistivity of 106-108 ohms throughout the humidity spectrum.
Features & Benefits
• Resistivity between 106-108 High gloss polymer
• Slip resistant
• Effective in low humidity
• Zinc free
Directions
With a new mop and clean pails, apply coating as follows:
• Apply thin coat to floor, i.e. ¾ way down on the ringer.
• Let dry to touch, approximately 45 – 60 minutes.
• Apply a second coat, approximately ½ way down on the ringer.
Note: Two coats only are recommended for conductive tile. If a third coat is applied, wait 24-hour waiting period/dry time after previous coat. If a third coat is applied, the floor space may be occupied once it is dry. After at least a 6-hour wait, buff the floor with a white pad to harden and polish the coating. Expect a coating yield of 1,200 ft2 for each gallon of coating per coat.
Features & Benefits
• Resistivity between 106-108 High gloss polymer
• Slip resistant
• Effective in low humidity
• Zinc free
Directions
With a new mop and clean pails, apply coating as follows:
• Apply thin coat to floor, i.e. ¾ way down on the ringer.
• Let dry to touch, approximately 45 – 60 minutes.
• Apply a second coat, approximately ½ way down on the ringer.
Note: Two coats only are recommended for conductive tile. If a third coat is applied, wait 24-hour waiting period/dry time after previous coat. If a third coat is applied, the floor space may be occupied once it is dry. After at least a 6-hour wait, buff the floor with a white pad to harden and polish the coating. Expect a coating yield of 1,200 ft2 for each gallon of coating per coat.
Produits relatifs
